This product has been specifically designed for textile and screen printing dryers.These belts are widely used for drying of screen printing and dyed textiles at higher speed and higher temperature.Mesh size of 4 X 4 mm provide a high percentage of open surface area creating maximum airflow and sufficient operation with minimum heat loss.Main characteristics of these belt are that they are dimensionally stable,Non flammable,Easy to clean and resistant to most chemical and solvents.Different sizes are available on customer request.
PTFE Mesh Conveyor Belt is an open-mesh PTFE-coated fibreglass belt built for drying, curing and UV-processing lines. Its open weave gives high air permeability while the PTFE coating provides a non-stick, heat-resistant surface.
It runs continuously to around +260°C, resists chemicals and is widely used on screen-printing dryers, food ovens and textile finishing lines.
| Material | PTFE-coated fibreglass mesh |
|---|---|
| Max Temperature | 260°C |
| Weave | Open mesh (high air flow) |
| Mesh Sizes | 1x1 mm to 4x4 mm |
| Form | Endless / jointed belt to order |
Commonly specified across:
It carries product through drying, curing and UV ovens where air must pass through the belt and nothing should stick.
Common openings run from about 1x1 mm to 4x4 mm; we make belts endless or jointed to your machine.
The PTFE coating allows continuous service to around 260°C.
Full specifications, applications and industries served — in one PDF for your records or to share with your team.
Send us your operating conditions and we'll help you source the right PTFE Mesh Conveyor Belt for the job.
Not sure this is the right material?
Launch the Solution Finder
